Translations:Additional Functions/1/en

From Larnitech wiki page
Jump to navigation Jump to search

Edit system elements

Using the Edit mode, you can specify any item as the system item (see Edit elements -> General. After that, it will not be displayed in sections.

If you have specified the item as a system item, and then you wanted to change something in this item or remove its system status, follow these steps:

  1. Enter the main menu and select Settings.
  2. Go to the Advanced tab.
  3. Tick the box next to Engineering mode.

After that, the item will be available in the section where it was originally located. For example, the lamp will be in the Actuators section, the heater will be in the Climate section, etc. You can change its settings using the Edit mode.

Be careful: when the engineering mode is enabled, the items will be displayed that are important for the correct system operation. Change the parameters of system items only when you are confident in the safety of actions performed.

Download playlist

You can use the UPnP playlist upload function to download the playlist from the media point to your device and upload the playlist from your device to the media point.

In order to do this, enter the menu, click on Settings and go to the Advanced tab. Tick the box next to the UPnP playlist upload point. Then, enter the Multiroom and select the media point you will work with in the Devices tab.

If the playlists on your device and the media point are different, the following window will appear on the screen.


Instruction162.png

  1. Upload local – upload the current playlist to the media point.
  2. Download remote – download the current playlist of the media point to your device.
  3. Ignore – do nothing.