editor, Interface administrators, Administrators, translation-admin, translator
9,750
edits
Changes
Jump to navigation
Jump to search
m
Updating page
Line 7:
Line 7:
==HW settings== <!--T:12-->
−{|class="wikitable"
−|-
−!Name!!Type, range!!SUBID!!Default!!Description
−|-
−|dm||char[3]||98||'RGB'||Each char is responsible for the type of a particular channel, RGB takes 3 channels
−*'D' – use like dimmer-lamp
−*'RGB' – Use like RGB lamp
−Example: dm='DDD'
−|-
−|def||integer 0-250||1-3||100||The default brightness level in case of a power reset (1..250). Example: def=250
−|-
−|min||integer 0-100||1-3||0||Minimum dimming level, example: min=10
−|-
−|max||integer 0-100||1-3||100||Maximum dimming level, example max=95
−|-
−|runtime||integer 0-100||98||5||Runtime is the speed of changing the brightness(measured in seconds). Example: runtime=15
−|-
−|f||integer 1-1000||98||500||It is frequency (measured in Hz); Example: f=500
−|}
−<!--T:16-->
−<syntaxhighlight lang="xml" line>
−<item addr="355:1" auto-period="600" cfgid="175" name="Dimmer" type="dimer-lamp" uniq_id="68"/>
−<item addr="355:2" auto-period="600" cfgid="175" name="Dimmer" type="dimer-lamp" uniq_id="69"/>
−<item addr="355:3" auto-period="600" cfgid="175" name="Dimmer" type="dimer-lamp" uniq_id="70"/>
−<item addr="355:98" cfgid="175" hw="dm='DDD' f=1000 runtime=20" name="Temperature" system="yes" type="temperature-sensor" uniq_id="47"/>
−</syntaxhighlight>
| peakl = 3A
| peakl = 3A
| voltage = 12/24 V DC
| voltage = 12/24 V DC
−| dim = ??x??x?? mm
+| dim = 65x18x15 mm
}}
}}
Line 48:
Line 48:
| maxperdev = 3A (36W at 12V)
| maxperdev = 3A (36W at 12V)
| power = 11.5 … 27.5 V DC from CAN
| power = 11.5 … 27.5 V DC from CAN
−| maxcur24v = 25 mA
+| maxcur24v = ? mA
| instalation = Free
| instalation = Free
| case = ABS
| case = ABS
| protection = IP40
| protection = IP40
| temprange = -10 … +50 °C
| temprange = -10 … +50 °C
−| size = 45x42x14 mm
+| size = 65x18x15 mm
| weight = 25 g
| weight = 25 g
}}
}}
Line 70:
Line 70:
#Disconnect the power from the load.
#Disconnect the power from the load.
#Disconnect the outputs.
#Disconnect the outputs.
−